Flange Industrial Vibrators
Flange Industrial Vibrators
Industrial vibrators with flange mounting are available in 2 series: EBB with side or center flange, and EBST with side flange only.
Highlights :
- Bearings with high load-carrying capacity to withstand heavy loads
- Side or center flange mounting
- Electric motor designed with low-loss silicon magnetic steel air gaps, for enhanced performance and reduced heat build-up
- Continuous operation at maximum centrifugal force
- Adjustable centrifugal weights to vary centrifugal force from 0 to 100%.
| Applications | Compaction, Conveying, Draining, Flow, Screening, Sieving, Sorting, Unclogging |
|---|---|
| Sector | |
| Energy | Electric |
- Standard three-phase power supply 400 V at 50 Hz
- Insulation class F
- Mechanical protection: IP65-7
- Class H resin-impregnated motor (ASTM method)
- Improved NiCrMo steel motor shaft
- Oversized bearings, lubricated with special “LONG-LIFE” grease KLUBER STABURAGS NBU 8 EP
- Bearing support with double lubrication channel
- EBB series version: supplied unwired and without bolts, but with identical weights (top and bottom) and flanged opposite cover.
- EBST series version: supplied unwired, without bolts and weights
Our wide range of flange-mounted industrial vibrators covers all vibratory machine application needs: screening, finishing, drying… and other processes requiring the use of vibrators with this type of mounting.
EBB series industrial vibrators are equipped with a series of centrifugal weights on both sides of the shaft, and a single side cover on the opposite side to the mounting flange.
EBST series industrial vibrators feature eccentric weights with differentiated intensity and angular phase adjustment between the upper and lower weights.
Please contact us directly with your requirements:
Eccentric weight protection covers, on the opposite side to the flange, for all EBB models with side or center flange.
- Standard three-phase power supply 400 V at 50 Hz
- Insulation class F
- Mechanical protection: IP65-7
- Class H resin-impregnated motor (ASTM method)
- Improved NiCrMo steel motor shaft
- Oversized bearings, lubricated with special “LONG-LIFE” grease KLUBER STABURAGS NBU 8 EP
- Bearing support with double lubrication channel
- EBB series version: supplied unwired and without bolts, but with identical weights (top and bottom) and flanged opposite cover.
- EBST series version: supplied unwired, without bolts and weights
Our wide range of flange-mounted industrial vibrators covers all vibratory machine application needs: screening, finishing, drying… and other processes requiring the use of vibrators with this type of mounting.
EBB series industrial vibrators are equipped with a series of centrifugal weights on both sides of the shaft, and a single side cover on the opposite side to the mounting flange.
EBST series industrial vibrators feature eccentric weights with differentiated intensity and angular phase adjustment between the upper and lower weights.
Please contact us directly with your requirements:
Eccentric weight protection covers, on the opposite side to the flange, for all EBB models with side or center flange.
Related products
EA and EA-X series three-phase industrial vibrators
EB and EB-X series three-phase industrial vibrators
Need help?
Call us on 04 78 83 31 31!
